1938 Singer 99K with knee lever controller.

 A good friend came across this 99K recently & donated it to the cause: ) Cheers Ricky!


Had many 99Ks before, but this is the first one with the knee lever that I have had my hands on. I'm very interested to try it running: ) It's in nice condition, but missing its bobbin cover/slide plate & the old, pre-war wiring needed replacing. Wiring is now done & it runs very well. Cover plate on its way.

First stitching for many a year here:


 The knee controller in its little prison looks like this.


With the knee lever inserted it is quite sensitive & positive in use. From a controllable slow crawl to full speed. But it's easy to keep the speed constant anywhere in between low & high. It's way better than the Button Foot controller on a carpet...The actual lever looks quite crude, but it could be modified I reckon.



Comments

Post a Comment

Popular posts from this blog

Singer 431G Slant-O-Matic throat plate pin problem

Image
The 431Gs are considered by many to be the epitome of Singers 'Engineered' (as opposed to injection moulded plastic) machines. The last of the best? This one is immaculate & has undamaged throat plate pins.... Be aware of this if you ever consider buying one. Many users assumed that the throat plate pins are cross head screws & try to use a screwdriver to remove them. DON'T!! They are 'snap fasteners' & easily damaged. The 'Screws' get broken thus & you will see many 431s in this sad condition. The pins are not available new & like 'hens teeth' second hand. The other important consideration as a buyer is the chain stitch throat plate & correct bobbin case. Make sure these original parts come with it if you want the machine to chain. Often sold seperately by knowing sellers because they fetch good prices on their own.... Be wary. If you do find a good one treasure it: ) They are fine machines & already 5
Read more

Singer 12K 1879 spares machine

Image
Was looking for a couple of missing parts for my nice 1880 12K & I did find the parts on Ebay. Trouble was the chap wanted £45 + £5 shipping for it! I was missing the spoon bobbin thread guide + its little spring/guide. The item he was selling was the Bobbin Winder, but not even complete. So I left it there, but later came across a 1879 12K machine on a charity website, without a case & it looked scruffy & came with no guarantees! But it had my spoon-guide. I got it for £40 delivered: ) It arrived in 2 days & when I checked it over it had a broken hand crank, was a bit scruffy but had a shuttle & 3 bobbins & a very nice wooden base. Ebay pic above.  So I remove the spoon-guide & its little spring & fitted it to mine; )   Finished off my machine nicely : ) The point with the spoon guide is that you can use a 12K without the spoon guide, you just need a thread supply from above. Like a table thread stand. Mine is now as it was originally & I don't
Read more

My first Bernina & a bit of a mad one: ) Minimatic 807. From 1974.

Image
Was watching this machine on my favourite VSM Charity site & ended up winning! Didn't really mean to win it, but no regrets: ) Looks good to me.     Looks to be in nice condition with a few extras: ) Ebay pics here. Only problem is no foot controller. But at £77 shipped I'm looking forward to delivery: ) There were two bidders competing with each other & I pipped them both at the post. Check the bidding. I like doing that; ) My 2 great neices watching were laughing too: ) I'm weaning them off TV. I'll update this when I get it. Got a chance on another similar item (a Bernina 707) tomorrow with a foot pedal... Watch for updates.  Wednesday 13th Sep. The other machine is finishing shortly. Same 2 bidders competing again; ) It's a 707 this time, but very similar. I'm hoping to ambush them at the end. Doing it twice would be quite sweet. It's on £26 with 5 hours left as I write. I did win it: ) £49.95 shipped. And I need shipping to my bed here at 11:30p
Read more